IRG100-65J-200A; IRG single -stage single-suction pipeline hot water pump

IRG hot water circulation pump is a single-stage single-suction cantilever centrifugal pump, suitable for hot water circulation and organic thermal power generation in metallurgy, power stations, chemical industry, heating waste heat utilization system or closed bribery. It is used to transport media with a temperature not exceeding 230℃ and a working pressure not higher than 3MPa.

IRG single -stage single-suction pipeline hot water pump parameter range:
Flow rate Q 5.4400m 3 /h
Lift H 680m

IRG single -stage single-suction pipeline hot water pump model description:
IRG100-65J-200A
IRG-Single-stage single-suction hot water centrifugal pump
100 - Diameter of suction port (mm)
65 - discharge port diameter (mm)
J - Indicates that the motor speed changes
200 - Impeller nominal diameter (mm)
A- indicates the change of impeller diameter (B and C indicate the second and next cutting impellers respectively)

IRG single -stage single-suction hot water pipeline pump structure type:
Vertical hot water pump. Horizontal axial suction, upward radial discharge. The pump body is rear-opening type, and can be repaired without disassembling the pump body, suction and discharge pipes. The pump shaft seal adopts packing seal or lead foil packing seal. The bearing is a rolling bearing, lubricated with thin oil.

IRG type single-stage single-absorption hot water pipeline pump rotation direction:
Viewed from the motor end, the pump rotates clockwise.