H71H-16P DN50 Wafer Check Valve

Estimated delivery : 60 Days; MOQ : 1 PCS
Valve Type : Check valve
Material : 304 Stainless Steel
Connection : Wafer
Connection size : DN50
Working pressure (KG) : 16
Category : Lift Check Valve
Seal material : 304 Stainless Steel
Caliber : DN50
Product Introduction Overview :
A check valve is a valve that automatically opens and closes the valve disc depending on the flow of the medium itself to prevent the medium from flowing back.
The main function of the check valve is to prevent the medium from flowing back, to prevent the pump and the driving motor from reversing, and to prevent the release of the container medium.

Features :
The working characteristics of the check valve are large load changes and low opening and closing frequency. Once it is put into the closed or open state, the service life is very long and no moving parts are required to move.
But once there is a switching requirement, it must be flexible, which is more demanding than common mechanical movements.
Do not allow the check valve to bear weight in the piping system. Large check valves should be supported independently so that they are not affected by the pressure generated by the piping system.
During installation, please note that the direction of medium flow should be consistent with the direction of the arrow marked on the valve body.
The lift type vertical flap check valve should be installed on the vertical pipe.
The lift type horizontal flap check valve should be installed on the horizontal pipeline.