6×14SD; SF single-stage double-suction horizontal split case centrifugal pump

The "SF" type pump is a single-stage, double-suction horizontal split centrifugal clean water pump, suitable for industrial and urban water supply and drainage pumps. It can be used as a drainage or water supply pump for factories, cities, power stations, water conservancy projects, etc., and can also be used for farmland irrigation. The "SF" type pump is a high-efficiency energy-saving product with a simple structure and excellent performance. It is used to transport clean water without solid particles or other liquids with physical and chemical properties similar to water. The temperature of the medium being transported is 0℃～80℃, and the allowable inlet pressure is 0.6MPa.

SF type single-stage double-suction centrifugal pump parameter range:
Flow rate Q 881400m 3 /h
Lift H 12100m

SF type single-stage double-suction centrifugal pump model description:
6×14SD
6-Discharge port diameter (inch)
14 - Maximum rounded impeller outside diameter (inches)
S-Single-stage double-suction horizontal split centrifugal pump
D - Maximum impeller outer diameter grade code (A, B, C, D, E, F, six grades in total)

SF type single-stage double-suction centrifugal pump structure type:
The "SF" series pumps are installed horizontally, with the suction port and discharge port both below the centerline of the pump shaft. The pump body is horizontally split, so there is no need to dismantle the water inlet and outlet pipes during maintenance. The shaft seal is a soft packing seal; it can also be changed to a mechanical seal.

SF type single-stage double-suction centrifugal pump rotation direction:
When looking at the pump from the motor end, the "SF" series pump rotates counterclockwise, with the suction port on the left and the discharge port on the right. When the pump rotates clockwise, the suction port is on the right and the discharge port is on the left.