500RS100; RS single -stage double-suction hot water pump

RS pump is a single-stage, double-suction, horizontal split-case centrifugal pump for heat network circulation. It is suitable for metallurgy, power stations, chemical industry, heating systems, etc. It is used to transport clean water without solid particles or other liquids with physical, chemical and properties similar to clean water. The temperature of the transported medium is -250℃～150℃, and the allowable inlet pressure is 0.8MPa.

RS single -stage double-suction hot water pump parameter range:
Flow rate Q 4004400m 3 /h
Lift H 21148m

RS single -stage double-suction hot water pump model description:
500RS100
500－Indicates that the pump suction port diameter is 500mm
RS－Single-stage, double-suction, split-center centrifugal hot water pump
100-The pump design head is 100m at normal temperature

RS single -stage double-suction hot water centrifugal pump structure:
The RS pump is installed horizontally, with the suction port and discharge port both below the center line of the pump and perpendicular to the pump shaft. The pump body and pump cover are separated horizontally along the center of the pump shaft. It is very convenient to remove the rotor parts for maintenance without disassembling the water inlet and outlet pipes and the motor by disassembling the coupling bolts and the pump cover. The shaft end seal can be either a packing seal or a mechanical bee (single-end unbalanced type). Users can choose the shaft seal method by themselves.

RS single -stage double-suction hot water centrifugal pump rotation direction:
When viewed from the motor end, the pump rotates counterclockwise, i.e. the suction port is on the left and the discharge port is on the right. The pump can also be made to rotate clockwise, i.e. the suction port is on the right and the discharge port is on the left.