10SA－6JA; SA single-stage double-suction horizontal split case centrifugal pump

SA type is a single-stage double-suction horizontal split centrifugal pump, suitable for factories, cities, mines, power stations, farmlands, water conservancy projects and other fields. It is used to transport clean water without solid particles or other liquids with physical and chemical properties similar to water. The temperature of the medium being transported is 0℃～80℃, and the maximum allowable inlet pressure is 0.6MPa.

SA type split case pump parameter range:
Flow rate Q 7210800m 3 /h
Lift H 11140m

SA type split case pump model description:
10SA－6JA
10 - Inlet diameter divided by 25 (i.e. inlet diameter is 250mm)
S-Single-stage double-suction horizontal split centrifugal pump
6 - The divisor of the specific speed divided by 10
J－indicates the change of rated speed
A－indicates the first change in the impeller outer diameter, A, B, C... and so on.

SA type split case pump structure:
The pump is installed horizontally, and the pump shell is split horizontally at the axis. The upper part is the pump cover, and the lower part is the pump body. The suction port and the discharge port are both on the pump body below the pump axis, and the center line is perpendicular to the axis. When inspecting, there is no need to dismantle the water inlet and outlet pipes, and the pump cover can be opened to take out the rotor parts. The shaft seal is a soft packing seal or a mechanical seal.

SA type split case pump rotation direction:
When viewed from the motor end to the pump, the SA pump rotates counterclockwise, that is, the suction port is on the left and the discharge port is on the right. The drive end can also be moved to the other end of the pump according to user requirements. At this time, the direction of rotation and the suction and discharge ports are opposite to the above.